河北体彩网廣義貨幣和社會融資規模增速高于去年,金融對實體經濟保持了較強的支持力度  目前,蘋果已卷入了一系列法律訴訟

Terms & Conditions for PCB Fab Express quotes and orders
General Terms and Conditions:

1. Sale subject to limited warranty. If you are buying PCBs only, then warranty extends only to bare PCBs and does not apply after components are added by you or others. Our liability shall not exceed price paid by you for the ordered PCBs. No change or addition to these terms, or any additional or different terms on your purchase order, shall be binding on us unless executed in writing by one of our officers.

2. Prices are FOB Sunnyvale in US dollars; Taxes & Shipping Charges extra as applicable.

3. This quote is only valid for 30 days unless otherwise agreed upon in writing by our representatives.

4. Payment is by Credit Card, unless credit terms have been established and agreed upon for this order.

TESTING OF PCBs:

To test the PCBs, we need customers to provide us an IPC Netlist in 356 format. If IPC Netlist is not provided in 356 format, we will create a netlist from the incoming customer Gerber files to generate an electrical test program. In such cases, we cannot guarantee, nor can we be liable for the electrical performance of the boards, since the test program itself is derived from the files submitted.

If you send us your design files in multiple formats (say, Gerbers and ODB++) it is your responsibility to ensure that the design in both formats is the same. We reserve the right to use any of the formats sent to us and will not cross-check between formats for consistency.

Terms & Conditions for PCB Assembly and Components:

QUOTE

1. Quote is based on RFQ Data provided at the time of this quote and is subject to change if data has changed at the time of order. We do not perform a full DFM analysis nor do we identify all the issues at the time of quoting. For turnkey quotes, the availability of components varies every day; and we do not guarantee that all the components will be readily available at the time of order without any lead-time issues.

2.Components Invoicing:

PCB Fab Express sends progress invoices for components: invoices for components will be sent when PCB Fab Express has started the procurement of components for your order. Such component invoices will be on Net 0 Terms (immediately due upon receipt).

3. High value component orders: If components order is more than $15,000, we will need 50% of the components order amount paid in advance to us at the time of booking (e.g. if components are $18000, then we will need $9000 in advance before order starts).

PAYMENT

1. Payments for all invoices will be as per terms mentioned in Quotes and Invoices. Customer shall not withhold payment against invoices already raised for any reason whatsoever, like unsatisfactory workmanship, pending rework or non-functioning boards or for any other reason. (for mitigation of these reasons, see Warranty and Limited Liability Clauses below).

2. If the payment for the Order is being done using a credit card then, by providing us a credit card number, you are also authorizing us to charge the card as per our policies.

3. Cancelled Orders: In general, you are liable for the cost of parts that have been purchased and expenses that have been incurred prior to cancelling an order.

ORDER

1. Assembly Order Acceptance is not guaranteed until your account is found in good standing.

2. Order Cancellation will be subject to costs already incurred plus a minimum cancellation charge of $400.

3. Component shortages:

a) Consigned parts shortage: If regardless of shortage, customer has asked us to proceed to the assembly phase, and if customer does not send the parts within 2 days of starting the order, then we will complete all assemblies with whatever components were consigned to us,and all assemblies (including shortage assemblies) will be shipped and invoiced as per order, and the order would be deemed to be completed. Later on, if the customer ships the shortage assemblies with the shortage parts to us for rework, such rework assembly would be done by us either at no charge or at a suitable rework charge to be determined by us.

b) Turnkey parts shortage: where it is known that some parts cannot be quickly procured due to unavailability or long lead times or other reasons, and customer specifically asks us to start the job nevertheless, such assemblies (including shortage assemblies) will be shipped and invoiced as per order, and the order would be deemed to be completed. When we finally get the ordered long lead-timecomponents, customer may EITHER opt to get those parts shipped to them (in which case no additional rework is involved); OR customer may send the shortage assemblies BACK to us for completion rework (Rework Re-Shipping charges will apply).

4. Completeness of Assembly data: It is customer's responsibility to provide complete and correct assembly data, BOM in excel spreadsheet, Assembly Gerbers, assembly drawings, Special instructions if any, and XY Pick and Place Data for SMT parts. If customer is unable to provide correct XY Data, additional charges will apply.

5. Turn Time: Assembly Turn Time will start when the kit is complete AND all assembly data related issues are resolved.

6. On-Time: We may make partial shipments for your order. You order will be considered shipped on-time if at least 90% of assemblies are shipped by the due date

7. Order Completeness: Orders may be considered complete, if the quantity shipped is within +/- 5% of the original quantity. We will invoice you for the boards shipped.


SPECIAL NOTE about substituting un-available passive components:

There is occasionally a market shortage on passive components. Here are PCB Fab Express's policies for substituting such passive components.

For non ITAR orders: In case of non-availability of specific passive components in your BOM, PCB Fab Express will use a direct replacement (Form, Fit, and Function Alternate) which either matches or is better on tolerance & other specifications. This is a common practice in the Assembly industry, and for all online orders we simply substitute the unavailable passives if needed.
For custom orders only: If you do not want such substitutions of passive components to be made without approval, you must explicitly say so in the header section of your BOM and also on your PO. Furthermore, you must inform your sales person at the time of placing your custom order that you want to approve every substitution.

For ITAR orders (whether online or custom): We will ALWAYS get customer approval before making ANY such substitutions.

ADDITIONAL TERMS FOR RAPID PROTOTYPE SERVICE (RPS) ONLINE ORDERS

Any PCBs manufactured under RPS will be made to IPC-6012 Class 2 - No Coupon specs and will follow RPS guidelines/restrictions. Any other spec mentioned in your files will be disregarded.
If you are ordering using our online RPS, where applicable, the selection you make online takes priority over what you indicate in your fab drawing or readme notes.
Example: Say for your PCB quote you choose material FR4 online, and placed an order. Now, suppose your fab drawing calls for Rogers material, we *may* then simply process your order using FR4 material, because that is what you indicated online and that is what your online quote was based on.

Our RPS online assembly labor pricing applies to services that fall within our standard assembly processes. The online labor quote is for RIGID boards only.
Furthermore, It does not include the following:
  • Assembly of Flex or Rigid-Flex boards.
  • Assembly of special items like PEM nuts, Turrets Terminals, Rivets, and Press-Fit connectors.
  • Special assembly processes like: Wire-Bonding, Conformal Coating, Underfills, Staking, POP assembly, wires & cables assembly.
  • Assembly Rework like cutting traces, soldering wire jumpers & cables onto the boards.


When you place an online order and we notice such special items or services, we will typically put your order on hold and quickly provide you an additional quote. We will require your approval on the extra cost for such services before proceeding with your order.

FOR RAPID PROTOTYPE SERVICE (RPS) ONLINE ORDERS ONLY: If we find via-in-pad in your PCB design, we put the PCBs through a process of via-filling to ensure high-quality assembly.
Please understand that this may add to your price and lead time, depending on complexity of your boards. A customer service team member will contact you accordingly.

SHIPPING CHARGES FOR RAPID PROTOTYPE SERVICE (RPS) ORDERS
Our shipping charges shown online are for up to a 2 lb. (2 pound) package weight. If your PCB/Assembly shipment exceeds that weight we will charge appropriate additional shipping charges.

SPECIAL NOTE about substituting un-available passive components in our ONLINE offers: PCB/Assembly or RAPID PROTOTYPE SERVICE (RPS) Orders
There is a current market shortage on passive components. In case of non-availability of specific Passive Components in your BOM, PCBFABEXPRESS will use Direct Replacement (FORM, FIT & FUNCTION) Alternate which matches or is better on tolerance & other specifications. This is a common practice in the Assembly industry.

WARRANTY

1. Assembly workmanship: All assembly workmanship will be as per IPC-A-610 unless otherwise directed in writing. All soldering will be using standard Tin/Lead solder in case of standard solder process assembly OR ROHS compliant solder in case of ROHS assembly and water soluble OA flux unless otherwise directed in writing.

2. ASSEMBLY WORKMANSHIP WARRANTY: We warrant each assembly for workmanship up to 30 days after shipment. In case of any unsatisfactory assembly workmanship, we will repair the assembly free of charge OR credit the quoted cost of the assembly labor at our sole discretion. Any modifications done to the assemblies by customer will nullify our warranties.

3. This warranty is also nullified on products which have been subject to misuse (including static discharge), neglect, accident or which have been altered by you and are not capable of being tested.

4. LIMITED LIABILITY-I: We are not liable for rework, repair or replacement for any faulty components supplied to us by customer or purchased by us from vendors in accordance with customer supplied BOMs.

5. LIMITED LIABILITY-II: We are neither responsible nor liable for assembled boards found non-functioning during testing by customer; we are only responsible for assembly workmanship performed as per customer supplied data.

6. LIMITED LIABILITY-III: In no case shall our liability exceed the price charged to you for the job performed by us. We are not liable for any assemblies beyond 30 days after shipment.

7. NO OTHER WARRANTY: We give no other warranty; either expressed or implied, and we specifically disclaim all other warranties, including warranties for merchantability and fitness.

8. No change or addition to these terms above, or any additional or different terms on your purchase order, shall be binding on us unless executed in writing by one of our officers.

Kitting Guidelines for components

1. Each SMT component line item must be in a single continuous tape - a minimum of 6" long cut tape / Reel / mini-reel. If not available on cut tape or reels, they must be on Trays. As a last resort they can be on Tubes

2.Each line Item must have extra quantity of components for ATTRITION during assembly process, as per the following guidelines

  • Discrete SMT passives:
    • 01005 size: 50% extra subject to a minimum of 100 pcs extra
      • Extra components Qty should be greater of 100 pcs or 50% of the required Quantity

        e.g. for 01005 size components, If Required Qty = 70, 50% extra = 35, Min Qty = 100, So Total Qty Required = 70 + max (35, 100) = 70 + 100 = 170

    • 0201size: 50% extra subject to a minimum of 50 pcs extra
      • Extra components Qty should be greater of 50 pcs or 50% of the required Quantity

        e.g. for 0201 size components, If Required Qty = 70, 50% extra = 35, Min Qty = 50, So Total Qty Required = 70 + max (35, 50) = 70 + 50 = 120

    • 0402 size: 25% extra subject to a minimum of 20 extra
      • Extra components Qty should be greater of 20 or 25% of the required Quantity
    • 0603 size: 15% extra subject to a minimum of 20 extra
      • Extra components Qty should be greater of 20 or 15% of the required Quantity
    • 0805 size: 10% extra subject to a minimum of 10 extra
      • Extra components Qty should be greater of 10 or 10% of the required Quantity
    • 1206 size or larger: 10% extra subject to a minimum of 5 extra
      • Extra components Qty should be greater of 5 or 10% of the required Quantity
  • Active Devices:
    • Component Width 0.6mm or smaller: 20% extra subject to a minimum of 20 extra
      • Extra components should be greater of 20 or 20% of the required Quantity
    • Component Width 0.6 - 1mm: 10% extra - subject to a minimum of 10 extra
      • Extra components should be greater of 10 or 10% of the required Quantity
    • Component Width 1 - 1.6mm: 10% extra subject to a minimum of 5 extra
      • Extra components should be greater of 5 or 10% of the required Quantity
    • Component Width 1.6 - 2mm: 5% extra subject to a minimum of 5 extra
      • Extra components should be greater of 5 or 5% of the required Quantity
    • Component Width Larger than 2mm: 5% extra subject to a minimum of 2 extra
      • Extra components should be greater of 2 or 5% of the required Quantity
  • 3.All Thru-hole (DIP) ICs must be supplied in trays or tubes or continuous tapes

  • Thru-Hole devices:
    • Small Devices: 5% extra subject to a minimum of 2 extra
      • Extra components should be greater of 2 or 5% of the required Quantity
    • Other Devices: 2% extra subject to a minimum of 1 extra
      • Extra components should be greater of 1 or 2% of the required Quantity
  • Hardware (screws, nuts, washers, etc.):
    • Hardware costing less than $.50: 10% extra subject to a minimum of 5 extra
    • Hardware costing $.50 - $2.00: 5% extra subject to a minimum of 2 extra
    • Hardware costing more than $2.00: 2% extra subject to a minimum of 1 extra
4.Insufficient attrition will be construed as parts shortage.
5.All consigned parts must be shipped to us in a properly kitted form (each line item of BOM in a separate bag, properly marked for identifying the component unambiguously).
6.Kits for multiple jobs must be in separate bags identified by appropriate assembly order number.
7.All parts must be shipped to Attn: PCB FAB EXPRESS, 306 Potrero Avenue, Sunnyvale, CA 94085 USA. Components must be received by 1:00 PM PST. Work will begin the following day for any board received after the cut-off time.
8.All shipments must include Order Number or Quote Number.

*All extra components subject to an additional minimum fee.
Browse Our Range

鸿发彩票下载安装

鸿发彩票下载安装

湖北快三预测一定牛  肖鋼認為,中國從2005年就開始研究REITs(房地產信托投資基金),已有十多年的研究  彼時,世茂集團總裁許世壇在發布會現場直言,“大魚吃大魚”的時代到了

河南体育彩票11选五  如果沒有Facebook(以及WhatsApp和Instagram),iPhone對許多用戶的吸引力就會大大降低  價值投資的第二點內涵就是你所買的公司一定是好公司,這是最核心的

河北省体育彩票网二是中國經濟增長對全球有正的溢出效應,尤其促進了周邊國家和主要貿易伙伴的經濟復蘇  今年以來,各國為應對疫情出臺了一系列貨幣政策、財政政策,為全球經濟穩定和復蘇發揮了積極作用

宏发彩票注册网址手机版2021年,很可能會看到這種競爭更加激烈中央銀行通過調節基礎貨幣為銀行貨幣創造提供支持和約束,銀行貸款創造存款貨幣時,要根據央行的要求將數量上等同于新增存款貨幣一定比例的超額存款準備金轉存為法定存款準備金,但中央銀行并不是貨幣創造的主體

  • PCB Fabrication
  • Component Procurement
  • Assembly

鸿运cc网投亞信科技5G城市數字孿生平臺產品以“巨量、孿生、融智、場景”為核心,為新型智慧城市構建數字孿生底座,提供全景可視、萬物智聯、彈性使用、快速編排、智能仿真、高效交付的通用能力平臺今年財政赤字規模比上年增加1萬億元,發行了抗疫特別國債1萬億元,安排地方政府專項債券3.75萬億元,比去年增加1.6萬億元

好运彩票手机客户端  REITs是房地產證券化的重要手段今年五一由于疫情的原因,只能線上看巴菲特直播

湖北快三跨度走综合  2018年,蘋果CEO庫克曾表示,他本可以效仿Facebook,利用數據銷售廣告,但“我們選擇不這么做”  2020中國移動全球合作伙伴大會剛剛落下帷幕

鸿发彩票官网合法  麥克納米說:“蘋果的文化是賦予客戶權力,而Facebook的文化則是剝削用戶  應當看到,超額存款準備金是可以支持銀行貨幣創造的銀行體系流動性,而法定存款準備金是被“凍結”的銀行體系流動性,不能支持銀行貨幣創造

好运彩票app真  “聯創+”是中國移動全面升級的合作創新計劃,旨在與合作伙伴建立更全面、更緊密、更長期、更深入的研發合作關系,共投資源、共擔風險、共有成果、共享收益  近年來,我國央行擺脫了外匯占款增長導致的被動擴表模式,貨幣政策自主性明顯增強,銀行作為貨幣創造中樞的作用充分發揮

合乐彩票安全  此外,繼“18福晟02”債券出現違約后,福晟集團“18福晟03”債券,又將在即將到來的12月中旬進入行權日  2020中國移動全球合作伙伴大會剛剛落下帷幕

红五三地图库福彩3d大會期間,作為戰略合作伙伴,亞信科技圍繞“5G+AICDE”與中國移動簽署了多項合作協議,雙方將形成更為全面、深入、務實的協作關系廣義貨幣創造的直接主體是銀行而非央行,現實中的廣義貨幣M2由銀行通過貸款等信用擴張創造而來,是由銀行自主實現的,并不需要用到基礎貨幣

河北快三app下载安装  印度3月25日因為新冠肺炎疫情實施全國封鎖之后,國內商業客運航班于5月25日恢復

湖北快三推荐号大家不僅要看現在的財務數據,還要看他未來的成長性大家不僅要看現在的財務數據,還要看他未來的成長性

湖北快三开奖一定牛  拉長時間軸看,我國央行擴表幅度與主要發達經濟體央行擴表幅度大體相當”  福晟集團福建寧德項目的業主劉峰也告訴記者,“項目原本監管銀行賬戶資金被開發商抽離了3.63億元,目前賬戶資金所剩無幾

好用的足球竞猜软件  亞信科技攜手中國移動咪咕、數字孿生體聯盟聯合發布  《中國5G城市數字孿生白皮書》  亞信科技攜手咪咕文化科技有限公司、數字孿生體聯盟聯合發布了亞信科技5G城市數字孿生產品和《中國5G城市數字孿生白皮書》  要確保在2030年前實現碳達峰,“‘十五五’時期煤炭消費量要進入比較快的下降通道

恒峰娱乐手机版登录下载  現在全球資本市場迎來了新一波的上漲,在新冠疫苗研發成功之后,新冠肺炎在海外擴散可能會逐步得到控制,這樣的話全球經濟將進入復蘇軌道,美國股市率先創新高,道瓊斯指數本周占上3,000萬點整數關口,這也會給全球股市帶來提振廣義貨幣M2的創造取決于銀行行為,而銀行貸款創造存款后所產生的繳納法定準備金的需求,央行既可以通過縮表的降準對沖,也可以通過擴表的再貸款工具提供,這意味著貨幣乘數其實是一種事后的恒等式結果,并不存在分子和分母之間的直接邏輯關聯

鸿运游戏厅网平台  對開發者不公平  然而,蘋果卻一直被各個政治派別視為壟斷除招商地產、中海地產、越秀地產、華潤置地等深圳土地拍賣市場的熟面孔外,總部在深圳的萬科、佳兆業均獲得年內在深圳的首宗公開招拍掛地塊,外來房企新城控股、安徽高速亦通過此次土地拍賣盛宴首進深圳

好玩的彩票赚钱技巧相較而言,主要發達經濟體央行大幅擴表多始于2008年國際金融危機后,是其在正常貨幣政策空間耗盡的情況下,進一步通過量化寬松政策投放流動性以刺激經濟所引起的,央行擴表與超額存款準備金增加基本對應,與我國存在本質差異2020年以來,中國人民銀行主要運用降準和再貸款工具對沖新冠肺炎疫情影響,但反映在央行資產負債表上,縮表的降準和擴表的再貸款兩者相互抵消,央行資產負債表規模保持基本穩定,同時廣義貨幣M2和社會融資規模增速明顯高于2019年,對比主要發達經濟體央行資產負債表規模大幅上升,突出反映了我國保持了正常貨幣政策且傳導順暢

河南体育彩票七星彩中國人民銀行推出了兩項直達實體經濟的貨幣政策工具——普惠小微企業貸款延期支持工具、普惠小微企業信用貸款支持計劃;財政部門創新轉移支付機制,資金直達市縣基層,發行了抗疫特別國債,支持抗疫和地方基礎設施建設  中國移動研究院網絡與IT技術研究所所長李晗、副所長陸璐,浙江移動網絡部網管中心副總經理林翀云,亞信科技5G網絡智能化產品線總經理朱多智與愛立信、EXFO、思博倫的企業代表共同發布了面向垂直行業的5G專網5GSLA智能感知和保障系統

TOP
河北省福利彩票快三湖北快三遗漏统计表河南体育彩票网官网合买彩票广告语大全集红双喜彩票一购物大厅好赢体育app